| |
| Chemical Composition |
| The finished grit shall have the chemical compositions as follows: |
| Carbon |
0.80-1.20% |
| Silicon |
>0.40% |
| Manganese |
0.35-1.20% |
| Phosphorus |
<0.050% |
| Sulfur |
<0.050% |
|
|
| |
Standard Hardness
The steel grit is manufactured by crushing the fully hardened shot to granular grit form, screening and tempered to three different hardness range as follows :
GH = > 60
GL = 50-60 HRc.
GP = 40-51 HRc.
It is also available in tempering to various hardness range for special application
|
|
| |
Microstructure
The microstructure of steel grit shall be uniform martensite, tempered to a degree consistent with the hardness range,with fine,well distributed carbides, if any.
|
|
| |
Density
The density of steel grit shall be not less than 7.4 g/cc. |
|
| Size Distribution (as per SAE J 827) |
|
|
